What We Do | Shadyside Roofing & Maintenance Roofing Services
From quick fixes to major projects, Shadyside Roofing & Maintenance has been the roofing contractor Shadyside homeowners call for 15 years. Here's a rundown of what we offer.
Roof Replacement
Full roof replacement starts with a complete tear-off down to the deck. We inspect every board for rot or soft spots. In Shadyside, we find decking damage on about 30% of tear-offs. Damaged sections get replaced with CDX plywood before anything else goes on. Then we build up: ice and water shield in valleys and at eaves, synthetic underlayment across the full deck, new drip edge on every edge, starter strip, field shingles, hip and ridge caps, and ridge vent. Dumpster, permits, and cleanup included.
Get a Free Quote →
Roof Repair
Improper step flashing is the leading cause of roof leaks at wall-to-roof transitions. Step flashing needs to be woven between shingle courses with each piece extending 4" above the shingle exposure. We see Shadyside homes where the last roofer used continuous L-flashing or just caulked the gap. That always fails. We tear it out and install proper step flashing with a kick-out diverter at the bottom per IRC R905.2.8.3.
Get a Free Quote →
Storm Damage Repair
Not all storm damage qualifies for a full replacement. Hail might only damage one slope. Wind might only lift shingles on the windward side. We document exactly what's damaged and let the insurance company make the call. Honest documentation gets claims approved. Inflated claims get denied.
Get a Free Quote →
New Roof Installation
Proper ventilation is the most overlooked element in new roof installation. We calculate intake and exhaust per IRC R806 based on attic square footage. Balanced ventilation. Soffit intake matched to ridge exhaust. Keeps your attic cooler in summer and drier in winter. That extends roof life and cuts your energy bill.
Get a Free Quote →
Metal Roofing
Color options in metal roofing are virtually unlimited. Matte black, charcoal, forest green, copper penny, barn red, slate blue. We order custom colors from Sheffield Metals and McElroy Metal with 40-year fade warranties. Your house, your style.
Get a Free Quote →
Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Ohio's weather.
Get a Free Quote →
Flat Roofing
EPDM (rubber roofing) has a 50+ year track record as a flat roofing membrane. We install fully adhered EPDM with taped or glued seams over polyiso insulation. It's a great option for Shadyside building owners who want proven performance at a lower cost than TPO or PVC.
Get a Free Quote →
Commercial Roofing
Your commercial roof has HVAC units, exhaust fans, plumbing vents, and satellite dishes punching through it. Every penetration is a potential leak point. We install prefabricated curbs, custom-welded flashings, and pitch pans that handle foot traffic and thermal cycling without failing.
Get a Free Quote →
Gutter Installation
Gutter replacement in Shadyside costs $8-$15 per linear foot installed. That includes hangers, end caps, outlet drops, miters, and at least two downspout runs. Copper is $25-$40 per foot. We give exact pricing in the estimate. No ranges.
Get a Free Quote →
Roof Inspection
Our inspection covers the roof and the attic. From the attic, we check for daylight through the roof deck, moisture stains on rafters, mold on sheathing, and ventilation function. Problems in the attic often indicate roof issues that aren't visible from the surface.
Get a Free Quote →
Emergency Roof Repair
After we secure the tarp and stop the leak, we photograph and document everything while the damage is fresh. This documentation is critical for insurance claims. Adjusters want to see the damage before any repairs are made.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →